datasheet www.perkinelmer.com/opto . description the photon counting head mp 900 series is designed for applications in all fields of single photon detection, e.g. chemoluminescence, bioluminescence, flourescence, in-vitro ssay,environmental measurements or pure research. it is an easy to use module, containing the channel photomultiplier, a high voltage power supply, a discrimination amplifier and a pulse shaper for fast output pulses. an installed active quenching system avoids over- illumination to the detector. it is also possible to apply an external gate function for time correlated photon counting. strong variations in light levels are possible due to the high dynamic range of the installed cpm. the exceptional low noise and high sensitivity facilitates detection of extremely low light levels. features high dynamic range no cooling required very high stability in noise level active quenching circuit for high light protection gateable cpm input optical fiber read-out possible 5 volts operating voltage monitor voltage output mp series photon counting modules ultra high sensitivity gateable photon counting module lighting imaging telecom sensors channel photomultipliers and modules
mp 900 series 1/3? photoncounting module technical specifications supply voltage 5 v dc supply voltage 5 v dc input current at max. count rate < 280 ma settling time < 1s (time to stabilize hv after supply voltage applied) over-illumination protection: active quenching control (internal) linear count rate: 5 mhz output pulse: ttl, positive active quenching control ttl-pulse, active high, reset:internal via timer, typ. 2,5 s, external via 5 v-pulse output pulse width 15 ns, (opt. 130 ns) gate voltage v gate 5 v: h to l set time v ca to v ch-ent +100 v : ~ 150 s 5 v: l to h set time v ca to v ch-ent - 100 v : ~ 150 s maximum ratings input voltage +5.5 v operating temperature 5 to 40 c storage temperature -20 to 50 c weight ~ 350 g operating conditions performance characteristics spectral response 0. 1 1 10 10 0 100 200 300 400 500 600 700 800 900 wavelength (nm) quantumefficiency (%) c 911 c 942 c 962 c 921 c 952 c 972 c 943 c 973 c 983 c 982 c 922 c 944 count rate linearity 1e+0 1e+1 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 1e+8 1e-18 1e-17 1e-16 1e-15 1e-14 1e-13 1e-12 1e-11 1e-10 light intensity [ w @ 410 nm ] counts *) additional models on request
md 1300 series 1/2? photon counting module technical specifications supply voltage 5 v dc input current at max. count rate < 280 ma settling time < 1s (time to stabilize hv after supply voltage applied) over-illumination protection: active quenching control (internal) linear count rate: 5 mhz output pulse: ttl, positive active quenching control ttl-pulse, active high, reset:internal via timer, typ. 2,5 s, external via 5 v-pulse output pulse width 15 ns, (opt. 130 ns) gate voltage v gate 5 v: h to l set time v ca to v ch-ent +100 v : ~ 150 s 5 v: l to h set time v ca to v ch-ent - 100 v : ~ 150 s maximum ratings input voltage +5.5 v operating temperature 5 to 40 c storage temperature -20 to 50 c weight ~ 420 g operating conditions performance characteristics spectral response 0. 1 1 10 10 0 100 200 300 400 500 600 700 800 900 wavelength (nm) quantumefficiency (%) c 13 11 c 1342 c 1362 c 1321 c 1352 c 1372 c 1343 c 1373 c 1383 c 1382 c 1322 c 1344 count rate linearity 1e+0 1e+1 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 1e+8 1e-18 1e-17 1e-16 1e-15 1e-14 1e-13 1e-12 1e-11 1e-10 light intensity [ w @ 410 nm ] counts *) additional models on request
mp 1900 series 3/4? photon counting module technical specifications operating conditions performance characteristics spectral response 0. 1 1 10 10 0 100 200 300 400 500 600 700 800 900 wavelength (nm) quantumefficiency (%) c 19 11 c 1942 c 1962 c 1921 c 1952 c 1972 c 1943 c 1973 c 1983 c 1982 c 1322 c 1944 count rate linearity 1e+0 1e+1 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 1e+8 1e-18 1e-17 1e-16 1e-15 1e-14 1e-13 1e-12 1e-11 1e-10 light intensity [ w @ 410 nm ] counts *) additional models on request supply voltage 5 v dc input current at max. count rate < 280 ma settling time < 1s (time to stabilize hv after supply voltage applied) over-illumination protection: active quenching control (internal) linear count rate: 5 mhz output pulse: ttl, positive active quenching control ttl-pulse, active high, reset:internal via timer, typ. 2,5 s, external via 5 v-pulse output pulse width 15 ns, (opt. 130 ns) gate voltage v gate 5 v: h to l set time v ca to v ch-ent +100 v : ~ 150 s 5 v: l to h set time v ca to v ch-ent - 100 v : ~ 150 s maximum ratings input voltage +5.5 v operating temperature 5 to 40 c storage temperature -20 to 50 c weight ~ 450 g
www.perkinelmer.com/opto ? 2001 perkinelmer, inc. all rights reserved. . usa: perkinelmer optoelectronics 2175 mission college blvd. santa clara, ca 95054 phone: (408) 565-0850 fax: (408) 565-0793 europe: perkinelmer optoelectronics gmbh wenzel-jaksch-str. 31 65199 wiesbaden germany phone: +49 611 492 534 fax: +49 611 492 578 asia: perkinelmer optoelectronics 47 ayer rajah crescent #06-12 singapore 139947 phone: +65 775 2022 fax: +65 775 1008 ds-289 rev a 1101 dimensions (mm) mp 900 series mp 1300 series mp 1900 series red: vcc, input (+5 v to +5.5 v dc) black: gnd coax: external gate in (ttl,active high) yellow: monitor voltage output (|v ch-ent /1000|) green: control voltage input via ext. opamp (ref. to manual) bnc connector: - ttl signal output - gnd connections caution: high voltage warning this product operates at high voltage. extreme care must be taken to ensure operator safety and to avoid damage to other instruments. avoid direct contact with the entrance window of the built in cpm when high voltage is applied. avoid placing conductive material close to the cathode. ensure that no light levels are applied, generating higher anode currents than specified. all given values are nominal/typical @ 20 c ambient temperature; specification subject to change without notice cpm
|
